Avocent AV Works, Инструкция по установке и эксплуатации

Страница: 86 / 144

74 AVWorks Installer/User Guide
Resynchronizing the device list
Resynchronizing is recommended if the local user has changed device names on the switch using
the OSCAR interface or if AVRIQ modules have been added or moved. For more information
about names, see
Device naming on page 3.
During the resynchronization process, a warning message will indicate that the database will be
updated to match the current configuration in the appliance. This warning contains a checkbox that
indicates whether offline AVRIQ modules should be included. When enabled (included), devices
associated with modules that are offline will not be removed. When disabled, offline modules will
be not included and devices associated with them will be removed.
NOTE: This procedure only resynchronizes your own AVWorks software client. To ensure consistency when you
have multiple systems using AVWorks software, save your resynchronized local database and restore it to the
other systems.
To resynchronize the device list:
1. Click the Settings tab in the AVR AMP.
2. Select the Devices category.
3. Click the Resync button. The Resync Wizard launches. Click Next .
4. A warning message will indicate that the database will be updated to match the current config-
uration in the appliance. Enable or disable the Include Offline AVRIQs checkbox. Click Next .
5. A polling appliance message box is displayed with a progress bar indicating that appliance
information is being retrieved.
6. If no changes were detected in the appliance, a completion window appears with this information.
-or-
If device changes were detected, the Detected Changes window will be displayed. Click
Next to
update the database.
If a cascade switch was detected, the Enter Cascade Switch Information window appears.
Select the type of switch connected to the appliance from the pull-down menu. If the type you
are looking for is not available, you may add it using the Add button. For more information,
see
Configuring Cascade Switch Connections on page 74. Click Next .
7. The completion window appears. Click Finish to exit.
Configuring Cascade Switch Connections
The Cascade category displays cascade switch information, including the AVRIQ module EIDs,
switch type and the port to which each is connected.
To configure a cascade switch connection:
1. Click the Settings tab in the AVR AMP.
2. Select the Cascade Switches category.