If you need less than 16 channels from the Yamaha device to be transmitted
into the Pro64 network Slots, simply change the appropriate DIP switches in
blocks SW1 and/or SW2. For example, to transmit only 8 total channels from
the Yamaha console to the Pro64 network, move all DIP switches in block
SW2 to the down position. Those Slots are then available to be used by other
Pro64 input devices within the network.
Card 2 of 3
The second card in the 48 x 16 digital snake receives Slots 17‑32 from the
network. It has the same Transmit Slot settings as card #1, but note that all 16
activation switches in blocks SW1 and SW2 are in the off (down) position.
ON
ON
ON
ON
ON
ON
SW7
SW8
SW3
SW9
SW4
SW1
SW2
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
49-56 OFF
57-64 OFF
R
ec
eiv
e 17-32
Tr
ansmit 49-64
MY16
The second 6416Y2 card in the 48 x 16 digital snake receives Slots 17-32 and
transmits nothing into the network.
Since the Transmit Slot range in SW9 is set to Slots 49‑64 but has no active
channels (as seen in SW1 and SW2) this parameter could be set to any other
range with no impact on the digital snake’s operation.
53
C
onfiGurinG
the
6416Y2 C
ard
