DIP Switch Block 9 (SW9)
Switch Block SW9 controls network‑level functions such as Auto/Manual
Mode selection and A‑Net transmit/receive settings.
DIP Switch Block 9 (SW9) Functions
Switch
Function Off (down)
Function On (up)
1
Auto Mode
Manual Mode
2
A‑Net Transmit Port (A, B, or
A+B) Select 0 *
A‑Net Transmit Port (A, B, or
A+B) Select 0
3
A‑Net Transmit Port (A, B, or
A+B) Select 1
A‑Net Transmit Port (A, B, or
A+B) Select 1
4
A‑Net Receive Port (A or B)
Select *
A‑Net Receive Port (A or B)
Select
5
Transmit Audio Base Slot
Select 0 *
Transmit Audio Base Slot Select
0
6
Transmit Audio Base Slot
Select 1
Transmit Audio Base Slot Select
1
7
Receive Audio Base Slot
Select 0 *
Receive Audio Base Slot Select
0
8
Receive Audio Base Slot
Select 1
Receive Audio Base Slot Select
1
9
Reserved
Reserved
10
Not Managed
Managed Mode
*
The tables that follow show DIP switch settings for transmit/receive.
Network Mode (Auto/Manual)
The Pro64 network can be set to operate in either Auto Mode or Manual
Mode using switch 1 in DIP Switch Block SW9. The default setting is Auto
Mode.
A-Net Transmit Settings (Manual Mode)
The 6416Y2 A‑Net Interface Card can transmit its activated channels to A‑Net
Port A, B, or both A
and
B when the network is running in Manual Mode. (This
setting does not apply when the network is operating in Auto Mode.) Use
switches 2 and 3 to direct A‑Net data to a specific port.
43
diP s
witCh
f
unCtions
