External head amp settings shown in the Virtual Rack screen on an M7CL
The M7CL External HA screen includes the following settings:
1.
Remote Preamps ID
— Available remote controllable
preamps are shown in groups of eight channels; note that
the remote device name is always displayed as “AD8HR.”
The red “+48V Master” text indicates that the remote
AD8HR preamp’s master on/off switch for phantom power
is on. The 6416m does not have a separate phantom power
master on/off switch, so this parameter will always be on.
2.
Expansion Slot Port Assignment
— Use this field to
assign channels of the 6416Y2 card(s) installed in the MY
expansion slots to the groups of eight remote mic preamp
channels. Each 6416Y2 offers two groups of eight channels,
1‑8 and 9‑16, at the 44.1/48kHz sample rate.
3. Virtual Mic Preamps
— This shows the current level setting
for each remote mic preamp device connected. Click on a
virtual rack to open the External HA screen.
Clicking one of the virtual preamp fields in the External HA tab of the Virtual
Rack screen (see #2 above) will bring up the eight‑channel External HA screen
for the selected group of eight channels that allows all remote controllable
parameters to be viewed and edited.
The available virtual preamp racks #1‑6 can be selected by choosing one of
the six numbers at the bottom of the screen. (See below.) Each virtual rack
displays eight channels.
72
m
-
Control
