Avery Weigh-Tronix ZM401, Руководство по обслуживанию

Страница: 76 / 156

76 ZM400 Series Indicators Service Manual
6 ADMIN level menus
6.5.8 Options
oPtionS Use this parameter to enable any of the available option cards.
buS 1 There is only 1 bus available on this indicator.
cArd 1 There can only be one card at a time in this indicator.
tYPE Choose the type of card installed from this list:
l
USB-D(evice) card.
l
Analog output card
l
802.11 wireless card (see note below)
l
Serial RS-485/20mA card
The ScALE menu item is for either of the next two input
cards:
l
5VDC Excitation Analog Scale Input card
l
10VDC Excitation Analog Scale Input card
The Ext io menu item is for the following I/O interface card:
l
External I/O Interface card
l
AC Input 4 relays (120-240VAC) card
l
DC Input 4 relays (4-30VDC) card
Options
Bus 1
Card 1
Type
None USB-D Analog WIFI RS485 Scale
Ext IO 4 in.AC 4 in.DC 4 out.AC 4 out.DC
Config
Baud D-bits Parity S-bits
Config
Lo Hi
Config
SSID Securty Wep.pass Wpa.pass
Calib
Zero Span
Adjust
Select
from list
Select
from list
Select
from list
Select
from list
If Type is
USB-D or
RS485
If Type is
Analog
If Type is
Wifi
Key in
value
Key in
value
Key in
value
Select
from list
Key in
password
Key in
password