Avery Weigh-Tronix ZM401, Руководство по обслуживанию

Страница: 46 / 156

46 ZM400 Series Indicators Service Manual
6 ADMIN level menus
6.3 Scale
Use the Scale menu to configure the scale operating parameters such as capacity and
division size, available units of measure, motion and auto zero tracking values, filtering
parameters, range of operation for zeroing the scale, over and underload conditions
and the return to gross zero region or band. Refer to the menu in
Figure 6.3 and the
steps that follow.
Figure 6.4 Scale menu
CAUTION: Be sure you follow all local weights and measures regulations.
Some parameters may be set automatically by your choice of SitE in the
System menu item.
Scale
Capacty Dvision Units Stable AZT Filter Ranges Type
Mode
0-rnge O-cap G-zero
Basis
Percent Div
O-Load U-Load
Avg
Const T-hold
Div Time
Unit
Ratio1 String1
Custom
Cust 1 Cust 4
Unit 1 Unit 2 Unit 3 Unit 4
0.000001 0.00002 0.00005 100 200 500
Off Cust 2 Cust 3 Cust 4 Lb 1000 g
Oz
Gr Lb-oz Cust 1
Scale 1 Scale 2
CAP 1 CAP 2 Div 1 Div 2 Type
M.range M.intrvl
2,3,Range
0.000001 500
0.000001 500
Option Protcl Disable Onbrd
Bind
Bus Card
Bus X Card X
Bind
Prot 1 Prot 10
Div
Time
Key in
scale capacity
to
Key in
value
Edit
string
Not for
Unit 1
Key in
value
Key in
time
Key in
value
1 thru 10 Key in
value
Key in %
of scale
capacity
Key in value
based on Basis
chosen
Key in 0 to
10000 div.
Key in
CAP 2
capacity
Key in
CAP 1
capacity
Key in
value
Key in
time
to
to
to
If Mode is
Option
If Mode is
Protcl
to