Avery Weigh-Tronix ZM401, Руководство по обслуживанию

Страница: 70 / 156

70 ZM400 Series Indicators Service Manual
6 ADMIN level menus
Print Choose this when you want to press the PRINT
key or when using Autoprint to send the data
through the selected binding (Port) using the
associated attributes.
Enq , Choose this to send data when the indicator
receives the configured enquire code from an
external device. The information will be sent
through the selected binding using the associated
attributes. See
ENQ & B-Cast commands on
page 84 .
SMA Choose this to send and receive data when
using the SMA (Scale Manufacturers
Association) protocol. See
SMA Protocol on
page 79 . The information will be sent through the
bound port using attributes that are predefined
by the SMA protocol.
b-cASt Choose this to send data continuously through
the selected binding using the associated
attributes. Typical use is for remote
scoreboards, displays and the Analog output
option if installed. See
ENQ & B-Cast commands
on page 84 .
PLC Choose this to send and receive data to/from a
PLC network. A binding of Enet x (1 through 5)
is required. The attributes are established using
the PLC menu described later in this manual.
See
PLC Configuration information on page 87 .
FtP Choose this to send data via FTP. A binding of
Enet x (1 through 5) is required. The Rate
attribute determines the time (in minutes)
between attempted FTP updates. A second
Protocol is required to complete the FTP setup.
This additional protocol requires a Type x =
PRINT, Bind x = File and Attributes x will need a
Print Format. Also, set File Path = FTP and
define the File Mode (File naming convention) in
the File menu described later in this manual.
rd Choose this to use the indicator as a remote
display. When set as a remote display, the
indicator will only function as a remote display
for the connected primary indicator which is
connected to the weighing platform.
nci Choose this to use the NCI communication
protocol. See
NCI commands on page 85 .
RD (remote display) requires selection of a port for Binding to the primary display.
Choices include Port 1, Port 2 or E-Net 1 through 5. Contact your local Avery Weigh-
Tronix representative for information on setting up the indicator as a Secondary
indicator.