Avery Weigh-Tronix ZM401, Руководство по обслуживанию

Страница: 71 / 156

ZM400 Series Indicators Service Manual 71
6.5 Ports
rEPortS Choose this for reports using footers and
headers.
bSq Choose this when using a BSQ base.
intPrt This stands for input interpreter. Choose this
when using macros.
This can only be
configured via Ztools. See the warning below.
Bind x - In this item you choose the physical connection, or hardware,
for the communication for Protocol x:
Port 1-2 , EnEt 1 through
EnEt 5 , FiLE , oPtion , Prtr 1 , Prtr 2 or Prtr.uSb . Some
Bindings will not apply for certain Type selections.
Attr x - In this item you choose the print format and other properties
that are required for the Type and Binding selected for
Protocol x. Some attributes will not apply for certain Types or
Binding combinations.
PrnFt , Choose a print format from the documented list.
Key in the format number. Print format
1 is the
default.
inhib This is motion inhibit. Choose on to enable or
oFF to disable. If enabled, data transmission or
file creation will be inhibited until there is no
motion on the scale or until the process times
out.
oFF is the default.
rAtE This is the transmit rate associated with
broadcast type. Choices are
1 , 2 , 5 , 10 or 20 Hz.
AddrESS Key in the node address if using an RS-485
option in a multidrop network. Choices are
1 to
254.
Enq Key in the enquire character used to request a
print function to occur from the communications
port. Choices are
0 to 255. 5 is the default value
(ASCII ENQ character).
Enq2 This functions the same as pressing the PRINT
key.
If Archive is enabled, this can be used for
Archive reporting to add the transaction record
and increment the counter. The default value is
7 (ASCII BEL character). Choices are 0 to 255.
WARNING: If using Input Interpreter, do NOT change to another TYPE from the
front panel or Input Interpreter will not be available without reconfiguring from
Ztools.