Avaya IP Office Phone Manager Скачать руководство пользователя страница 302

Страница: 302 / 324

Phone Based Administration

Page 302

- Issue 6a (Thursday, February 22, 2018)

IP Office Basic Edition

Comments on this document? [email protected]

ETR 18D/ETR 34D Phone

1. At either or the first two extensions on the system, press

Feature 0 0

followed by two presses of the first

intercom or call appearance button.

System Administration:

is shown on the display.

3. Dial

#124

. The display will show

System Manual Backup

4. Press

Enter

to start the backup. The display will show Backup in Progress.

5. If the backup was successful, the telephone display will show the message

Backup Successful

6. If a backup fails the telephone display will give the reason why the backup was unsuccessful.

Shutdown and Insert Card

No card was detected in the phone system's

System SD

card slot. For correct operation of the phone system

the Avaya SD card should always be present at all times.

System Busy

Another backup, restore, upgrade or copy was already in progress at the time the manual process was
requested.

Backup Failed

This message indicates that there was some problem. For example the card in the phone system's System SD
card slot was removed during the backup or the card has become corrupted.

Exit programming by pressing

Feature 00

. You can also exit programming mode by lifting the handset, then

placing it back in the cradle.

If you exit the procedure before the backup has finished, the backup will continue but no feedback will be
displayed.

Содержание IP Office Phone Manager





































































































































































































































































































































Результаты поиска

Содержание IP Office Phone Manager

Отзывы:

Avaya IP Office Phone Manager, Руководство пользователя, Страница: 302 / 324

Результаты поиска

Содержание IP Office Phone Manager

Отзывы: