Phone Based Administration
Page 218
- Issue 6a (Thursday, February 22, 2018)
IP Office Basic Edition
Comments on this document? [email protected]
15. Holding Calls
15.1 Hold Recall Time
Set how long a call can be placed on hold before recalling to the extension that put it on hold if that extension is idle.
1408/1416/9504/9508 Phone
1. At either of the first two extensions on the system, press
Admin
.
·
To do the above during a call, you may need to press the
PHONE
button to display the
Admin
soft key
option. If you access phone administration during a call, only the
SPEAKER
,
MUTE
and
HEADSET
buttons still affect the connected call.
2. Use the
up or down
arrow buttons to scroll the display to
System Administration
. When highlighted, press
Select
.
3. Use the
up or down
arrow buttons to scroll the display to
System Parameters
. When highlighted, press
Select
.
·
Alternatively, dial
#
and the
code.
4. Use the
up or down
arrow buttons to scroll the display to
Hold Timer
. When highlighted, press
Select
.
5. The current setting is displayed.
6. Enter then option required
0
(off) to
9
. The default is
5
(60 seconds).
0
= Not Active
2
= 20 seconds
4
= 45 seconds
6
= 90 seconds
8
= 150 seconds
1
= 10 seconds
3
= 30 seconds
5
= 60 seconds
7
= 120 seconds
9
= 180 seconds
·
Alternatively use the left or right arrow icons to toggle through the settings or
Default
to return to the
default setting.
·
Exit programming by pressing
PHONE
. Alternatively use the
Back
button to move to another menu.
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1. At either of the first two extensions on the system, press
Feature **config
(ie.
Feature **266344
).
·
set, it is requested. Enter the password.
2. The phone displays
System Admin
.
3. Dial
#127
. The phone displays
Hold Timer
.
4. Press the appropriate digit to change the value. The default is
5
(60 seconds).
0
= Not Active
2
= 20 seconds
4
= 45 seconds
6
= 90 seconds
8
= 150 seconds
1
= 10 seconds
3
= 30 seconds
5
= 60 seconds
7
= 120 seconds
9
= 180 seconds
·
Alternatively use the
Next Data
or
Previous Data
buttons to change the setting or press
Remove
to return
to the default setting.
·
To exit phone based administration at any time, press the
Release
button. To select a different process use the
Next Procedure
or
Previous Procedure
buttons or dial another feature code.
ETR 18D/ETR 34D Phone
1. At either or the first two extensions on the system, press
Feature 0 0
followed by two presses of the first
intercom or call appearance button.
2.
System Administration:
is shown on the display.
3. Dial
#127
. The phone displays
Hold Timer
.
4. Press the appropriate digit to change the value. The default is
5
(60 seconds).
0
= Not Active
2
= 20 seconds
4
= 45 seconds
6
= 90 seconds
8
= 150 seconds
1
= 10 seconds
3
= 30 seconds
5
= 60 seconds
7
= 120 seconds
9
= 180 seconds
·
Alternatively use the
Next Data
or
Previous Data
buttons to change the setting or press
Remove
to return
to the default setting.
·
Exit programming by pressing
Feature 00
. You can also exit programming mode by lifting the handset, then
placing it back in the cradle.
10
114