Automation Direct STRIDE SiteLink SE-SL3011, Руководство пользователя

Страница: 73 / 123

STRIDE
®
SiteLink Series Industrial VPN Routers User Manual 1st Edition
3-9
Chapter 3: Controller Connection Examples
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
C-more HMI Connection via Wired Router SE-SL3011
The wired Stride VPN router is a valuable options when:
•
Adding a third-party device to the remote network is permitted.
This example will step you through connecting to a C-more HMI via the wired router, model
SE-SL3011. Internet access will be via the wired WAN connection, and the C-more HMI will
be connected to a LAN port on the router.
NOTE: Regarding Ethernet access to a C-more panel
If you intend to take advantage of any methods of remote access to the panel, you need to consider the security
exposure in order to minimize the risks to your process and your C-more panel.
Security should always be carefully evaluated for each installation. Refer to the “Security Considerations for Control
Systems Networks” section of Appendix B.
Before You Begin
1. Know your C-more network settings.
2. Have your SE-SL3011 router and USB stick available.
3. Have an established STRIDE SiteLink platform account set up.
Setup
Remember that you can’t browse across the VPN to the router’s LAN network, so the C-more
HMI must be configured and the network settings known before you configure your router.
Configure the C-more HMI Network Settings
For our example, we’ll configure C-more HMI as follows:
• IP Address: 192.168.140.19
• Subnet mask: 255.255.255.0
• Default Gateway: 192.168.140.1 (the router’s LAN IP address) This must be on the same
subnet as the C-more HMI