Automation Direct STRIDE SiteLink SE-SL3011, Руководство пользователя

Страница: 38 / 123

STRIDE
®
SiteLink Series Industrial VPN Routers User Manual 1st Edition
2-8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
Chapter 2: STRIDE SiteLink Platform
Manually Configure DNS Server
After clicking SHOW MORE on the WAN setup dialog box, click “Add a custom DNS
server”. This radio button will already be selected if a static IP address has been entered.
Enter the IP address of the preferred DNS server (IPv4 only).
Configure Digital Input for Wired Connection
The Digital Input feature allows you to enable or disable the VPN connection or the
complete WAN port based upon an external digital signal supplied to the router. Electrical
details for the Digital Input can be found in the “Wiring” subsection of the “Hardware”
chapter of this manual.
Disabling the VPN connection disables remote programming, but allows remote monitoring
including data logging. Disabling the WAN connection disables all communications
including data logging.
By default, the Digital Input is disabled. To use this feature, click the dropdown arrow to
the right of the Digital Input field and select on option from the dropdown box. Available
options are:
•
Disabled (Digital Input state is ignored. VPN router functions normally.)
• Disable VPN connection when input is high
• Disable VPN connection when input is low
• Disable WAN port when input is high
• Disable WAN port when input is low
Configure Proxy Server
If your network requires the router to connect to the internet through a proxy server, please
click the switch to enable this feature, and enter configuration information as follows.
Enter the IP address of the proxy server (IPv4 only), and enter the proxy server port number.
If authentication is required for the proxy server, click the dropdown arrow to the right
of the Authentication field and select “Basic authentication” then enter a username and
password for the proxy server.
Configure a WiFi WAN Connection
After selecting “Wireless network” as the method to connect to the internet, enter the name
(SSID) of the wireless network and enter the WiFi password if needed, then click NEXT.
The wireless router has its internet-facing IP address and DNS server assigned via DHCP.
The Digital Input control of the VPN is disabled by default. If you wish to enable the Digital
Input, click SHOW MORE in the upper right corner of the dialog box. The Digital Input