Automation Direct STRIDE SiteLink SE-SL3011, Руководство пользователя

Страница: 103 / 123

STRIDE
®
SiteLink Series Industrial VPN Routers User Manual 1st Edition
B-3
Appendix B: Troubleshooting
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
Switching Your WAN Configuration from Wired to WiFi/4G and Vice Versa
The internet connection method can be changed for a WiFi or 4G SiteLink router from the
SiteLink platform. Before changing the connection method, make sure the new connection
method is available to the router (e.g., Ethernet cable is connected, WiFi network is available,
SIM card is inserted, antennas are connected). Remember that if the new connection method
to the router is not available, access to the router will be lost and the router will need to be
defaulted and reconfigured
WARNING: DO NOT insert or remove the SIM card when power is applied to the router.
To begin, select Devices from the first-tier menu (1), select the router to be configured in the
second-tier menu (2), select the CONFIG tab in the third-tier menu (3), and then click the
pencil icon to the right of “WAN” (4).
An “Edit WAN” dialog opens, as shown below.
Click the desired WAN connection method to turn it on. A configuration dialog for the selected
WAN connection method will open. Enter the relevant configuration parameters as discussed
in the “ Configure the Internet Settings ” subsection of Chapter 2.
Finally, from the CONFIG tab push the changes to the router.