Automation Direct STRIDE SiteLink SE-SL3011, Руководство пользователя

Страница: 72 / 123

STRIDE
®
SiteLink Series Industrial VPN Routers User Manual 1st Edition
3-8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
Chapter 3: Controller Connection Examples
Configure Your SE-SL3011-WF Router
1. Create your Stride SiteLink account at www.StrideSiteLink.com , as discussed in Chapter 2.
Steps 2 through 13 are outlined in detail in Chapter 2. If you have already completed router
activation, please proceed to step 14.
2. Once you’re logged in, Select “Tools > Start Configuration” and confirm the appropriate
company, then click NEXT.
3. Select “Wireless Network”
4. Enter the name (SSID) and password for the wireless network, then click NEXT.
5. On the WAN information screen, Click SHOW MORE to configure the Digital Input
VPN router access control if desired. Click NEXT when finished.
6. On the LAN information screen, enter the Default Gateway address (Router port IP
Address), which must match that entered in the BRX PLC setup (e.g., 192.168.140.1).
7. Download the configuration file. Rename it ixrouter.conf if it has been saved with a suffix.
8. Copy ixrouter.conf to the root directory of your USB stick.
9. Install the IXClient2 on your PC. (This step must be repeated for any new PC where you
will use your STRIDE SiteLink account.)
10. Mount and wire your SE-SL3011-WF router, and connect the WiFi antenna.
11. With Power DISCONNECTED from the router, insert the USB stick into the router.
12. Power your router. Wait while the router writes the configuration and then registers itself
to the STRIDE SiteLink Server. After the router is successfully registered and connected to
the STRIDE SiteLink platform, the Status LED will be on steady blue.
13. Activate the router.
14. Now, your router will appear in the Devices list in your Stride SiteLink account.
15. Select the router from the list of devices, then click the CONNECT icon.
Configure the Do-more Designer Software to Access the BRX PLC via VPN
1. Open the BRX Do-more Designer software on your PC and select “New Link” from the
Links panel on the lower left of the Launchpad tab.
2. Click the “Link Editor...” button.
3. Select the PLC family (Do-more BRX Series in this example) and PLC Type.
4. Click the “Port” tab, select Ethernet and enter the BRX IP address defined previously
(192.168.140.19 in this example).
5. Enter a Name and Description for this PLC link, then click ACCEPT.
6. Double-click the new entry in the Links list to connect to the BRX PLC.
You should now be successfully connected to the BRX PLC from a remote PC through the
VPN.