Automation Direct STRIDE SiteLink SE-SL3011, Руководство пользователя

Страница: 41 / 123

STRIDE
®
SiteLink Series Industrial VPN Routers User Manual 1st Edition
2-11
Chapter 2: STRIDE SiteLink Platform
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
3. Register Your STRIDE SiteLink Router
To register your router on the SiteLink Platform, you must plug the USB stick with the
configuration file into your SiteLink router.
Next, make sure the router has the necessary hardware connected to allow internet access as
specified in the configuration file (i.e., WAN port ethernet cable, WiFi antenna, or mobile
network antenna and SIM card).
Finally, boot up the router by attaching the power cable.
The LED on the router will start blinking now, indicating that it’s running the registration
procedure. This usually takes somewhere between 20-30 seconds to complete.
4. Activate Your STRIDE SiteLink Router
Once your router is registered it will show up as a new device on the devices page. Before you
can start using the device, it must first be activated. You can trigger the activation form by
clicking on the device’s status icon in the list view. From then, activating the router is as simple
as giving it a name and clicking the ACTIVATE button.