Automation Direct STRIDE SiteLink SE-SL3011, Руководство пользователя

Страница: 22 / 123

STRIDE
®
SiteLink Series Industrial VPN Routers User Manual 1st Edition
1-8
Chapter 1: Hardware
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
Installation
Installation and Removal Procedures
NOTE: These devices are open-type and are meant to be installed in an enclosure which is only accessible with the
use of a tool and suitable for the environment.
Installing and Removing from DIN rail
The STRIDE SiteLink router can be easily installed on a standard
DIN rail. (1) Hang the device on the rail and (2) push the unit
down until you feel a click. To remove the unit, (A) pull/rotate the
device up and (B) lift off the rail.
Installing the SIM Card (for SE-SL3011-4G)
The SIM card slot uses a standard (size 2FF) SIM card.
NOTE: AT&T SIM card and data plan required for 4G LTE operation. These can be purchased at
https://marketplace.att.com/data-plans .
WARNING: DO NOT insert or remove the SIM card when power is applied to the router.
To insert, push the SIM card into the slot until you feel a click; this is approximately 1mm
inside the device. Release the card and the card will stay in the device. The end of the SIM card
should be aligned with the outside of the enclosure.
1
2
A
B