Automation Direct STRIDE SiteLink SE-SL3011, Руководство пользователя

Страница: 39 / 123

STRIDE
®
SiteLink Series Industrial VPN Routers User Manual 1st Edition
2-9
Chapter 2: STRIDE SiteLink Platform
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
configuration options are the same as those for the Wired WAN connectivity, except that the
WAN port is unused and cannot be disabled. The available options are:
•
Disabled (Digital Input state is ignored. VPN router functions normally.)
• Disable VPN connection when input is high
• Disable VPN connection when input is low
Configure a 4G WAN Network
After selecting “Cellular network” as the method to connect to the internet, enter the Access
Point Name (APN) associated with the cellular network to which the SIM card is configured.
Enter the PIN code for the SIM card if applicable, then click NEXT.
The mobile router has its internet-facing IP address and DNS server assigned by the mobile
network.
The Digital Input control of the VPN is disabled by default. If you wish to enable the Digital
Input, click SHOW MORE in the upper right corner of the dialog box.
The Digital Input configuration options are the same as those for the Wired WAN connectivity,
except that the WAN port is unused and cannot be disabled. The available options are:
•
Disabled (Digital Input state is ignored. VPN router functions normally.)
• Disable VPN connection when input is high
• Disable VPN connection when input is low
Configure LAN IP Address
The VPN router creates a separate subnet on the LAN side. At this stage in the router setup,
only the router’s IP address (IPv4 only) on the LAN subnet needs to be entered. After the router
is connected to the SiteLink platform, DHCP server, network mask, and internet access settings
can be configured through the platform.
After entering the LAN IP address, click NEXT to continue.