TD- Documentation
Mounting Instruction
Chain drive KSA xxx-24 V / 230V 219-100-0-0-1.0.doc
Page 21 of 68
The selection of appropriate fastening devices and materials is an
important prerequsite
for the safe
and flawless functioning of drives on power-driven windows.
Only the following fastening devices and materials are to be used!
Prior to beginning with assembly, check size of fastening devices that can be used: size 5!
Check in regular intervals that all clamping and mounting screws are firmly seated; tighten if necessary!
We recommend the use of appropriate glueing materials (e.g. Loctite) to prevent mounted parts from becoming loose through
vibration of moving drives.
In case of ambiguities consult the window manufacturer or drive supplier.
Selection of fastening devices
Wood
Threaded /,
self-tapping/
or sheet metal screws
size
e.g.
ISO 4762, ISO 4017
ISO 7049 , ISO 7085
DIN 7500
cylinder head with
hexagon socket,
, Phillips or
outer hexagon
Blind rivet nut
size
e.g. with knurled
countersunk head
with head version
internal serration
(Torx)
M5 or
ST4,2 or ST4,8
M5
Steel / stainless steel
Plastic
Window profile - examples
Specified fastening material
Fastening possibilities
Sheet metal screws
or self-tapping screws
Metric threaded screws
with blind rivet nuts
Threaded /,
self-tapping/
or sheet metal screws
size
e.g.
ISO 4762, ISO 4017
ISO 7049 , ISO 7085
DIN 7500
cylinder head with
hexagon socket,
, Phillips or
outer hexagon
Blind rivet nut
size M5
e.g. with knurled
countersunk head
with head version
internal serration
(Torx)
M5 or
ST4,2 or ST4,8
Metric threaded screws
with blind rivet nuts
K
F
K
F
F
K
Sheet metal screws
or self-tapping screws
F
K
Wood screws
size
e.g.
half-round with slot
half-round with
Phillips head or
hexagon bolt
or special form
secure screws
against loosening
in wood with glue
with head version
Recommendation
5
DIN 96
DIN 7996
DIN 571
Aluminum
Wood screws
A
Screws for
plastic
size
sheet metal screws
in
e.g.
DIN 95606
DIN 95607
ISO 7049
ISO 7085
DIN 7500
half-round with
Phillips head or
hexagon bolt
or in special form
with internal
serration
with head version
5 or
ST4,2 or ST4,8
Screws for plastic
(if possible, screw through
two chamber connectors)
K
F
Sheet metal or self-tapping
screws (Screwing connection
carried out through reinforce-
ment of steel chamber)
K
F
The use of suitable screws depends on the window material as well as the wall thickness of the profile. It also depends on the expec-
ted force transfer from the drive to the window. Depending on the profile system, different fastening materials may be suitable.
This has to be determined prior to assembly / installation.
K
F
13
