manualshive.com logo in svg

AUMA TIGRON TR-M1000X, Руководство по эксплуатации

Поделиться
Скачать
AUMA TIGRON TR-M1000X Скачать руководство пользователя страница 7

1.3.

Warnings and notes

The following warnings draw special attention to safety-relevant procedures in these
operation instructions, each marked by the appropriate signal word (DANGER,
WARNING, CAUTION, NOTICE).

Indicates an imminently hazardous situation with a high level of risk. Failure
to observe this warning results in death or serious injury.

Indicates a potentially hazardous situation with a medium level of risk. Failure
to observe this warning could result in death or serious injury.

Indicates a potentially hazardous situation with a low level of risk. Failure to
observe this warning could result in minor or moderate injury. May also be
used with property damage.

Potentially hazardous situation. Failure to observe this warning could result
in property damage. Is not used for personal injury.

Safety alert symbol 

 warns of a potential personal injury hazard.

The signal word (here: DANGER) indicates the level of hazard.

1.4.

References and symbols

The following references and symbols are used in these instructions:

Information

The term Information preceding the text indicates important notes and information.

Symbol for CLOSED (valve closed)

Symbol for OPEN (valve open)

➥

Result of a process step

Describes the result of a preceding process step.

7

TR-M30X – TR-M1000X
TR-MR30X – TR-MR1000X

Safety instructions

Содержание TIGRON TR-M1000X













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды