AUMA TIGRON TR-M1000X, Руководство по эксплуатации

Страница: 41 / 76

8.2.1. Type of seating setting via the device menu
Valve damage due to incorrect setting!
→
The type of seating setting (limit or torque seating) must match the selection for
the valve.
→
Only change the setting with prior consent of the valve manufacturer.
Information Local actuator settings are made using the Combi-Switch.
●
Operate the yellow shuttle dial of the Combi-Switch to scroll within the menu
.
●
Operate the black selector switch (outer ring), either to confirm the selected
menu or to go one step back (ESC).
How to proceed 1. Open device menu.
Information: If the ID of the indicated page starts with M, PRM, ... , you have
already entered the device menu. For further information, refer to:
➭
page 35,
Open device menu
2.
Select menu
M0086
or
M0087
:
Customer settings M0041
Type of seating M0012
End position CLOSED M0086
End position OPEN M0087
➥ The display shows parameter PRM0578 or PRM009 .
Figure 49: For user levels 1–3 (read parameters only):
Information
Use (Enter) to change from user levels 1–3 to a higher user level. For further
information, refer to:
➭ page 37, Change user level
Figure 50: For user levels 4–6 (settings can be changed):
Change settings
3.
Select new value via . (At least user level 4 required.)
→
Limit
= Limit seating
→
Torque = Torque seating
Information: The black triangle ▶ shows the saved value. A white triangle ▷
shows the selected value which has not yet been saved.
4. Save selected value with (Enter)..
➥ The display shortly indicates Value saved! . The type of seating is set for the
end position.
5. Press ESC (Escape) to return for further parameter setting.
41
TR-M30X – TR-M1000X
TR-MR30X – TR-MR1000X
Commissioning