Asus RS100-X5 - 0 MB RAM страница 95 Скачать руководство пользователя

Страница: 95 / 98

ASUS RS100-X5/PI2

Please read this carfully!

This script will automatically compile and load the sk98lin

driver on your host system. Before performing both compilation

and loading, it is necessary to shutdown any device using the

sk98lin kernel module and to unload the old sk98lin kernel

module. This script will do this automatically per default.

Please plug a card into your machine. Without a card we aren’t

able to check the full driver functionality.

Do you want proceed? (y/N)

6. Read the message on the screen and enter

to continue.

IMPORTANT INFORMATION!

We found an alternative driver for your Marvell product on this system.

The alternative driver is _NOT_ directly supported by Marvell and does not

include all features provided by your device. If you want to use the

sk98lin driver developed by Marvell, you may choose either to deactivate

or remove the alternative driver.

[PRESS ANY KEY FOR FURTHER INSTRUCTIONS]

7. Press any key to continue.

Do nothing:

- The sk98lin will be installed

NOTE: It may happen that the alternative driver will be loaded on

the next boot process. In this case the Marvell driver _WON’T_ be

loaded.

Deactivate driver:

- The alternative driver will be renamed to _skge.ko or _sky2.ko

- All references in the /etc/modprobe.conf file will be changed to

the sk98lin driver

- The alternative driver will be unloaded

- The sk98lin driver will be installed

Remove driver (recommended):

- The alternative driver will be removed from your system

- All references in the /etc/modprobe.conf file will be changed to

the sk98lin driver

- The alternative driver will be unloaded

- The sk98lin driver will be installed

1) Do nothing

2) Deactivate diver

3) Remove driver

Action:

8. The system prompts you to remove the old LAN driver and use the new

driver instead. Enter

to continue.

9. Confirm the installed driver version. For example, enter:

dmesg.|grep.sk98lin

10. Refer to Red Hat distribution documentation to configure the network protocol

and address.

Содержание RS100-X5 - 0 MB RAM



































































































Результаты поиска

Содержание RS100-X5 - 0 MB RAM

Отзывы:

Похожие инструкции для RS100-X5 - 0 MB RAM

Бренды по названию

Популярные бренды

Asus RS100-X5 - 0 MB RAM, Руководство пользователя

Результаты поиска

Содержание RS100-X5 - 0 MB RAM

Отзывы:

Похожие инструкции для RS100-X5 - 0 MB RAM

Бренды по названию

Популярные бренды