ASTEC Peterson 6700B, Руководство по безопасности оператора

Страница: 118 / 152

C
H A P T E R
4 D
I S P L A Y I N G
M
A C H I N E
I
N F O R M A T I O N
1 1 6 6 7 0 0 B G
R I N D E R
O
P E R A T O R
S
A F E T Y
M
A N U A L
8 1 7 8 5 C
Feed System Information
Feed System Page
The Feed System Page (Figure 140) shows the current
status of the feed system. Yellow messages in the upper
right of the display indicate feed system activity. For
more information, see “Peterson Adaptive Control Sys-
tem” on page 118.
The display page is divided into the following three sec-
tions:
Compression Roll Information
• The direction arrows show directions (forward,
reverse, up, down) the compression roll is moving.
• Float shows that the compression roll is moving.
“Hold” is displayed when the roll is stopped.
• The compression roll bar graph and the “## Height”
below the graph show the current roll height. The
numbers on the right side show the roll height set-
points.
• Compression Roll Ratio shows the ratio of the com-
pression roll speed (ft/min) to the feed chain speed
(ft/min). This ratio can be changed in “Machine Sta-
tus and Options” on page 89.
• Actual Speed shows the actual speed of the com-
pression roll (compression roll ratio
x feed actual
speed).
• Pressure shows the hydraulic pressure in psi
required to turn the compression roll.
F05756
Figure 140: Feed System Page