3
Routine Maintenance
38
STERRAD
®
Sterilization System Routine Maintenance Guide
8. Press
OPEN
DOOR
to change the displayed seconds.
9. Press
CLOSE
DOOR
to accept the desired seconds. The display
changes to date.
10. At the same time, press
START
and
CANCEL
to exit the time and
date editor.
Clock Mode
1. Press
CANCEL
at any time during the previous date/time setting to
set the clock mode. Clock mode selects either a 12-hour clock or a
24-hour clock.
2. Press
OPEN
DOOR
to select the clock mode.
3. Press
CLOSE
DOOR
or
CANCEL
in Clock Mode to go to the
Pressure Units menu.
CLOCK MODE XX
OPEN(chng)-CLOSE(accept
)
Setting Pressure Units
The Pressure Units menu displays the units select for pressure. The
selected units are also printed at cycle completion. The units can either
be in Torr or Pascals.
PRESSURE UNITS = TORR
OPEN(chng)-CANCEL(next)
1. Press
OPEN
DOOR
to switch the pressure units between Torr and
Pascal. The pressure units are set to Torr by default. The pressure
units also reset to Torr whenever a loss of battery power is detected
or the number of total machine cycles is reset to zero.
2. Press
CANCEL
to transfer to the history menu.
