Routine
Maintenance
3
STERRAD
®
Sterilization System Routine Maintenance Guide
31
Figure 12. Unrolling the ribbon before
mounting the second roll.
4. Hold back the right security clip and insert the other roll into the
printer.
5. Turn the right roll clockwise to remove any slack from the ribbon.
6. Close the printer drawer, taking care to ensure that the printer paper
exits the printer paper slot.
To replace a
printer ribbon cartridge,
do the following:
1. Open the printer drawer on the control panel.
2. Remove the used cartridge by firmly, but carefully, pulling on the
right side, as indicated by the arrow on the cartridge.
Figure 13. Removing the used printer cartridge.
3. Discard the used cartridge.
4. Insert a new cartridge by aligning the left side of the cartridge with
the bracket on the machine. Push on the right side of the cartridge to
snap it into place.
Figure 14. Inserting a new printer cartridge.
