28
have Both selected, simply press the Multi
button to reach the first page of parameters.
A second press takes you to the second page
of parameters, and a third press cycles back to
the first page, etc.
Multi Edit: Page 1
The Right display contains different parameters for page 1 depending on the value of the first
parameter. Use Control knob 1 to select the mode for the Multi: Dual or KeySplit. This parameter
is omitted from the Page 1 tables.
Page 1: Multi mode = Dual
These parameters are visible only when the Multi mode = Dual. The exception is the Balance
parameter, which is always visible on this page.
Control number Name
Range
Description
2
VelSplit
Off, On
Enables or disables VelSplit
3
LO Max [1]
2 – 127 Sets the upper velocity limit for the Lower part [2]
4
UP Min [1]
1 – 126 Sets the lower velocity limit for the Upper part [2]
5
Balance
-/+ 64.0 Controls relative levels of Lower / Upper parts [3]
7
LO Fade [1] 0 – 127 The MIDI velocity range required for transition to
zero level
8
UP Fade [1] 0 – 127 The MIDI velocity range required for transition to
full level
[1] Visible only when VelSplit = On
[2] Partially linked: LO Max can not exceed UP Min by more than one value, and vice versa.
Overlap is unlimited.
[3] Linked to the Balance control: changing the value there also changes it here.
Dual mode includes two types of velocity transitions: Cross-switching and crossfading.
• If VelSplit = Off, the Upper and Lower parts are triggered by all velocity values, and their
relative levels can be set by the Balance control.
• If VelSplit = On, velocity can switch between the Upper and Lower parts or crossfade
between them depending on the LO Fade and UP Fade settings. Note that the limits for
the Upper low velocity and the Lower high velocity can overlap, so there can be a center
“velocity window” where both parts are available.
Page 1: Multi mode = KeySplit
The following parameters are visible only when the Multi mode = KeySplit. The exception is the
Balance parameter, which is always visible on this page.
Control number Name
Range
Description
2
KeySplit
C1 to C7 Determines the Lower / Upper split point [1]
3
Crossfade
0 – 80
The MIDI note range required for full transition
between parts, in multiples of 2
5
Balance [2] -/+ 64.0
Controls relative levels of Lower / Upper parts
[1] Hold Control button 2 and press a key to change the KeySplit point.
[2] Linked to the Balance control: changing the value there also changes it here.
KeySplit mode can have a split point that is either absolute or gradual by using the Crossfade
parameter to define the width of the crossfade zone. For example:
