64
the same value as the previous step or the
next one.
• For longer step sequences, use LFO Delay
so LFO 2 comes in for the 2nd bar (set LFO
1 to One-Shot = On).
• The Copy feature described below is very
useful here: Copy one LFO to another and
make slight changes to create counter-
point or to harmonize. Be sure to copy
• You can invert a melody with mod route
level of -128.
• Remember, if you run out of LFOs, you can
use a looping envelope as an LFO.
LFO Shortcuts
These are described in greater detail in other chapters, but they’re so easy and useful we’ve
included them here too.
Copy LFO A to LFO B
1. Hold [SAVE]
2. Press and release the source (LFO A)
3. Press and release the destination (LFO B)
4. Release [SAVE].
Create a direct Mod route
To set up a mod route to a specific parameter
from inside a module:
1. Hold [LFO X] to select the source
2. Press the Control button for the desired
destination parameter, then release both
buttons
3. Those items appear in the first open Mod
Matrix slot as the source and destination,
respectively
4. Set the modulation amount with the
lower Control knob.
