ASM Polytouch HUDRASYNTH Deluxe Скачать руководство пользователя страница 93

Страница: 93 / 115

Find by Patch #

This puts the patches in order first by the Bank

they occupy, then in numerical order within

the Banks. The Banks are arranged like this:

• Single mode (writable): A001 to H128
• Single mode (read only):

M1-001U to M5-128U

M1-001L to M5-128L

• Multi mode (writable): M1-001 to M5-128

Find by Name

This option puts all of the patches in alpha-

betical order. As Control knob 1 is turned the

patch Bank and number might jump around a

lot; this is because the patches are still in their

original locations. They are not relocated when

the Find By option is changed.

Find by Category

This sorts the patches by their categories (Arp,

Bass, FX, etc.). The categories themselves are

sorted in alphabetical order, and Control knob

3 is used to scroll through the categories. Note

that Control knob 3 is only active when Find

By Category is selected.
Control knob 1 is used to select individual

patches within the selected category. As it

is turned the patch Bank and number might

jump around a lot; this is because the patches

are not relocated when the Find By option is

changed.

Compare

The patch shown in edit field 5 can be used

to compare the current state of an edited

patch with its unedited version (the default

selection) or with any other Hydrasynth patch

of the same type (Single or Multi).
Control knob 5 is used to scroll through the

patches, which are always displayed here in

their original order (by Bank and number). To

jump through that list 10 patches at a time,

hold [SHIFT] while turning Control knob 5.
Once the desired patch number appears in

edit field 5, use Control button 5 to make the

patch active. Toggle that button as often as

needed to compare it to the edited patch.

Note that temporary edits can be made to the

comparison patch, but those edits will be lost

as soon as Control button 5 is toggled back to

the patch being edited.

Favorite Assign...

There are times when it is very useful to group

certain patches together without having

to relocate them. This feature helps you to

prepare by designating certain patches as

Favorites. It makes them available for rapid

selection later.
There are 16 banks of Favorites containing

eight patches each. You can put the same

patch in several of those locations if you know

you’ll need that patch more than once during

a performance, for example.
Favorites are

not

selected from inside the

Favorites Assign page; this will be explained

shortly. So the first step is to select the desired

patch on the Home page. After that, here’s

how to add that patch to the Favorites list.

1. Press [BROWSE] to access the Browse

page.

2. Press Control button 8 to access the

Favorite Assign page.

3. To assign that patch to the first Favorites

slot, press Control button 1.

The LED ring will flash quickly to confirm

the assignment.

4. Use the Down/Up arrows to select the

next group of 8 patches, if the current

patch belongs there too.

The Left display indicates which of the 16

groups is selected.

5. Return to the Home page to select

another patch, then repeat steps 1-4 to

place it in a Favorites group.

6. Repeat steps 1-5 until the Favorites

groups are full.

During the steps above the Patch knob and

the Left/Right arrows are disabled. This helps

prevent the accidental replacement of a

Favorite within one of the groups.

Содержание Polytouch HUDRASYNTH Deluxe




















































































































Результаты поиска

Содержание Polytouch HUDRASYNTH Deluxe

Отзывы:

Похожие инструкции для Polytouch HUDRASYNTH Deluxe

Бренды по названию

Популярные бренды

ASM Polytouch HUDRASYNTH Deluxe, Руководство пользователя

Результаты поиска

Содержание Polytouch HUDRASYNTH Deluxe

Отзывы:

Похожие инструкции для Polytouch HUDRASYNTH Deluxe

Бренды по названию

Популярные бренды