Artesyn Embedded Technology 6806800U29D, Инструкция по установке и эксплуатации

Страница: 45 / 144

Functional Description
SharpStreamer™ Pro PCIE-7210 Installation and Use ( 6806800U29D)
45
3.6.1 MicroSD as Firmware Recovery Option
The microSD can be used as a BIOS recovery option. For this you need to perform the following
steps:
1. Format the microSD card as FAT32, then copy the recovery firmware onto the card.
2. Insert the microSD card into the socket, and install the PCIE-7210 card into the server.
3. Boot the server to a Linux CentOS.
4. Run the PCIE-7210 command to recover the firmware.
3.6.2 MicroSD as Non-Volatile Storage
The microSD slots can accommodate up to 32GB of flash storage that can be used as storage,
similar to a flash thumb drive.
3.6.3 MicroSD as Boot Device
By default, during the card boot operation, the BIOS will first look for a boot record on the
microSD storage device. If no boot record is found, then the card tries to PXE boot from the
Server. If this is not successful, the processor reboots and tries the boot sequence again. The
boot sequence can be modified in the BIOS.
3.7 Temperature Sensors
There are several temperature sensors on the PCIE-7210 card. Two SPD memory temperature
sensor devices on the card scattered around the card. Each SPD device has a temperature
sensor in addition.The SPD temperature sensor can be used to measure the surrounding air
temperature to the card corners. Also, there are temperature sensors built into each SODIMM
modules.
The process to write the recovery BIOS into the firmware over the microSD bus can take
about 10 minutes.