manualshive.com logo in svg

Artesyn Embedded Technology 6806800U29D, Инструкция по установке и эксплуатации

Поделиться
Скачать
Artesyn Embedded Technology 6806800U29D Скачать руководство пользователя страница 36

 

Hardware Preparation and Installation

SharpStreamer™ Pro PCIE-7210 Installation and Use ( 6806800U29D

)

36

2.4

PCIE-7210 Card Installation and Removal

This section contains the PCIE-7210 card installation and removal procedures.

2.4.1

PCIE-7210 Card Installation 

To install the PCIE-7210 card, perform the following steps:

1. Use anti-static pads and attach an ESD strap to your wrist. Attach the other end of the ESD 

strap to an electrical ground (For more details, refer to the section 

Precautions

 

on page 34

).

2. Identify the system in which the PCIE-7210 card is to be installed.

3. Remove the system cover.

Shipping the card along with a server is not recommended. 
If you still need to ship the card along with the server, ensure the card is properly 
secured in the server. Check if necessary precautions were followed to keep the card 
resistive against wobbling. Otherwise, there are chances of card getting damaged. 
For more information about securing the PCIe card in a server, refer to MaxCore 
product documentation.

You must allow the card to cool for 30 minutes, before removing it. In case you try to 
touch the card, the heat sink could be hot enough to burn your skin.

For detailed information about the PCIe card installation, refer to MaxCore product 
documentation.

Содержание 6806800U29D

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды