Artesyn Embedded Technology 6806800U29D, Инструкция по установке и эксплуатации

Страница: 43 / 144

Functional Description
SharpStreamer™ Pro PCIE-7210 Installation and Use ( 6806800U29D)
43

GE
One GE port is connected between each PCH and the Edge connector 2 through i219 and
i347 devices.
3.5.2 Low Speed Serial Interface
3.5.2.1 Two-wire interface

SML
The SML is System management logic. SML is a low speed connection for low power state
mode for manageability communication.

SMBus
System Management Bus is used as interface between devices.

I2C0
This interface is connected to the inlet and outlet onboard temperature sensors.
3.5.2.2 SVID
The System V interface Definition (SVID) is a 3-wire digital interface used to transfer power
management information between the Master and Slave. In PCIE-7210, the processor acts as a
Master and the voltage regulators act as slaves for this SVID interface.
3.5.3 Boot Controller
The boot controller is responsible for managing the boot process. The boot process loads a
boot image that is stored in 128Mbit on board SPI FLASH connected to each PCH device.