Artesyn Embedded Technology 6806800U29D, Инструкция по установке и эксплуатации

Страница: 105 / 144

Base Operating System
SharpStreamer™ Pro PCIE-7210 Installation and Use ( 6806800U29D)
105
6.3.1
Connecting the Console
CPU1 and CPU2 serial consoles are exposed via faceplate through Silicon labs (CP2105) single-
chip USB to Dual UART bridge. Connect a microUSB to USB cable with mircoUSB end to the
CONSOLE on the faceplate and the other end to the PC or laptop.
For Windows 7 or Later : Teraterm
Drivers are automatically installed up to connecting the cable.
For Linux (any recent distribution) : minicom
Serial USB driver cp210x should be available.
6.3.1.1
Serial Console Options
The following table provides serial port configuration information.
The output from the card can be viewed over serial console. The default Kernel command line
uses the following console options.
console=tty0 console=ttyS1,115200n8
To use sol console, use the second option during the bootup in the GRUB prompt.
console=ttyS2,115200n8
Table 6-3 Serial Port Configuration Parameters
Parameter Default Settings
Baud Rate 115200
Data Bits 8
Parity No
Stop Bit (s) 1
Flow Control Off
Terminal Type Teraterm