Artesyn Embedded Technology 6806800U29D Скачать руководство пользователя страница 136

Страница: 136 / 144

MaxCore Firmware Upgrade

SharpStreamer™ Pro PCIE-7210 Installation and Use ( 6806800U29D

)

136



Select

Preserve Configuration

to preserve the network configuration (IP,

username, password, DHCP, VLAN).



Click

Enter Update Mode

and follow the wizard through the upgrade. Select

Full Flash

check box to perform a complete firmware upgrade always.

Upgrade the Companion CPLD

You can skip this step, if the Companion CPLD firmware already has the most recent
version. For more information, refer to

MaxCore MC3000 Release Notes

Use the following command to upgrade the IO-CPLD.

./ipmitool –I lan –H 192.168.201.9 –U admin –P admin hpm

upgrade mc3000-cpld-companion-0.2.6.hpm component 3 force

Upgrade the Glue CPLD

You can skip this step, if the Glue CPLD firmware already has the most recent
version.
Use the following command to upgrade the Glue CPLD.



In any case, if you observe that the firmware upgrade fails, repeat the firmware
upgrade procedure again



Firmware upgrade progress is not seen immediately. As the first step, the

ipmitool

loads the firmware image into the BMC. This may take some time (~30sec).
In the next step, the

ipmitool

states

Writing firmware: 100% completed. Please do not stop execution at this point,
ipmitool is still working!

Wait until the following message appears “Firmware upgrade procedure
successful” (~2min).

Содержание 6806800U29D

















































































































































Результаты поиска

Содержание 6806800U29D

Отзывы:

Бренды по названию

Популярные бренды

Artesyn Embedded Technology 6806800U29D, Инструкция по установке и эксплуатации

Результаты поиска

Содержание 6806800U29D

Отзывы:

Бренды по названию

Популярные бренды