manualshive.com logo in svg

Artesyn Embedded Technology 6806800U29D, Инструкция по установке и эксплуатации

Поделиться
Скачать
Artesyn Embedded Technology 6806800U29D Скачать руководство пользователя страница 21

 

 

SharpStreamer™ Pro PCIE-7210 Installation and Use ( 6806800U29D)

21

Sicherheitshinweise

Dieses Kapitel enthält Hinweise, die potentiell gefährlichen Prozeduren innerhalb dieses 
Handbuchs vorrangestellt sind. Beachten Sie unbedingt in allen Phasen des Betriebs, der 
Wartung und der Reparatur des Systems die Anweisungen, die diesen Hinweisen enthalten 
sind. Sie sollten außerdem alle anderen Vorsichtsmaßnahmen treffen, die für den Betrieb des 
Produktes innerhalb Ihrer Betriebsumgebung notwendig sind. Wenn Sie diese 
Vorsichtsmaßnahmen oder Sicherheitshinweise, die an anderer Stelle diese Handbuchs 
enthalten sind, nicht beachten, kann das Verletzungen oder Schäden am Produkt zur Folge 
haben.

Artesyn Embedded Technologies ist darauf bedacht, alle notwendigen Informationen zum 
Einbau und zum Umgang mit dem Produkt in diesem Handbuch bereit zu stellen. Da es sich 
jedoch um ein komplexes Produkt mit vielfältigen Einsatzmöglichkeiten handelt, können wir 
die Vollständigkeit der im Handbuch enthaltenen Informationen nicht garantieren. Falls Sie 
weitere Informationen benötigen sollten, wenden Sie sich bitte an die für Sie zuständige 
Geschäftsstelle von Artesyn.

Das System erfüllt die für die Industrie geforderten Sicherheitsvorschriften und darf 
ausschließlich für Anwendungen in der Telekommunikationsindustrie und im Zusammenhang 
mit Industriesteuerungen verwendet werden.

Einbau, Wartung und Betrieb dürfen nur von durch Artesyn ausgebildetem oder im Bereich 
Elektronik oder Elektrotechnik qualifiziertem Personal durchgeführt werden. Die in diesem 
Handbuch enthaltenen Informationen dienen ausschließlich dazu, das Wissen von 
Fachpersonal zu ergänzen, können dieses jedoch nicht ersetzen.

Halten Sie sich von stromführenden Leitungen innerhalb des Produktes fern. Entfernen Sie auf 
keinen Fall Abdeckungen am Produkt. Nur werksseitig zugelassenes Wartungspersonal oder 
anderweitig qualifiziertes Wartungspersonal darf  Abdeckungen entfernen, um Komponenten 
zu ersetzen oder andere Anpassungen vorzunehmen.

Installieren Sie keine Ersatzteile oder führen Sie keine unerlaubten Veränderungen am Produkt 
durch, sonst verfällt die Garantie. Wenden Sie sich für Wartung oder Reparatur bitte an die für 
Sie zuständige Geschäftsstelle von Artesyn. So stellen Sie sicher, dass alle 
sicherheitsrelevanten Aspekte beachtet werden.

Содержание 6806800U29D

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды