ARRI K2.47050.0, Инструкция по эксплуатации

Страница: 6 / 119

6
•
Operate the system using only the type of power source indicated in the
manual. Unplug the power cord by gripping the power plug, not the
cord.
•
Never insert objects of any kind into any part of the system through
openings, as the objects may touch dangerous voltage points or short-
circuit connections. This could cause fire or electrical shock.
•
Unplug the system from the power outlet before opening any part of the
system or before making any changes on the systems, especially the
attaching or removing of cables.
• Do not use solvents to clean.
• Clean optical surfaces only with a lens brush or a clean lens cloth! In
case of solid dirt moisten a lens cloth with pure alcohol.
•
Do not loosen any screws, which are painted over!
•
Danger of injury: After switching the drive direction the focus and iris
motors automatically move.
•
The antennas must always be kept screwed on to their bushing to
protect the highly precise antenna bushing (Reverse-SMA).
• In order to ensure optimal radio connection the bushing must be free of
dust and dirt at all times. If necessary, remove the antenna and clean
antenna and bushing using pressured air. Do not use any tools that can
harm antenna or bushing.
Specific safety instructions:
•
As the end-stops of the iris ring on the ARRIMACROS change when the
lens is focused, the ARRIMACROS may not be used with the LCS or the
WRC-1 system.
•
Danger of injury with the rotating drive gears on the lens barrel, or when
switching the operating direction on the UMC-1, LDB and FEM-2!
•
Any violation of the safety instructions or neglect in personal care could
cause serious injuries (including death) and damages on the system or
other objects.
Note: Notes are used to indicate further information or information from
other instruction manuals.
→
Photo indicates objects which are shown in the illustration.