ARRI K2.47050.0, Инструкция по эксплуатации

Страница: 21 / 119

21
Mounting the handle adapter to the handle
Mounting the HD IVS to the ARRICAM ST view finder
To mount the HD IVS onto the
ARRICAM ST view finder use a
3 mm hex key and tighten screw
S1, S2 and S3. To have access to
screw S2 use the hole as marked.
→
Photo
Take out the screws S1 and S2 with a
3 mm hex key and remove the old
support. Mount the new handle
adapter with the same crews.
→
Photo
Attach the handle back onto the
camera.
Attention: The handle adapter has to
be used, otherwise a solid support is
not guaranteed.
To remove the handle from the
camera, loosen the screws S1, S2
and S3 with a 3 mm hex key
→ Photo