ARRI K2.47050.0, Инструкция по эксплуатации

Страница: 98 / 119

98
5.11 Time Code
The HD-IVS can insert the film cameras time code, the user bits and pull
down information into the video assist image to create a direct link to the
post production.
It is possible to insert a time code, which is related to the film camera
speed, e.g. 24 fps, or a time code which counts according to the selected
HD-link speed, e.g. 25 fps.
Pull down information indicates if the actual displayed image is a new
image or if this image is a repetition of the previous image because of the
compensation of the different frame rates between the film camera and
the HD-link speed.
This additional line shows the Time Code, User Bit and Pull down
information:
29012009 12:34:56/** A1
Note: The frame information (the last two digits of the time code display) is
only active if time code is actually recorded on film. If there is no
time code recording on film, because for example the camera is not
running on a time code speed, only the symbol
**
is displayed on
that position.
The adjustment of the white level of the inserted data is described in
chapters
5.5.8 White Level, an inverse display is described in chapters
5.5.9 Inverse.