ARRI K2.47050.0 Скачать руководство пользователя

Страница: 86 / 119

The following menu is displayed on the screen:

The

-Symbol shows, which

position in the user text line is
to be changed. To move this
text inserter cursor

left and

right, use the keys

and

To change the character on the

position of the text inserter
cursor

, use the keys

and

After the necessary character
was found, move the text
inserter cursor

to the next

position.

To leave the text edit mode,
press the Enter/Insert key

This will lead back to the user
text menu.

5.9.3

Clear Text

The user text line can be

cleared on the HD-IVS without
an external device. When the
text is cleared, the default line

(a dotted line) will appear.

A cleared line cannot
be recalled any more.

Move the cursor by using the
keys

and

to the line

- CLEAR TEXT

→

Photo

Pressing the keys

will

clear the line.

The default text is in dotted
characters.

Содержание K2.47050.0
























































































































Результаты поиска

Содержание K2.47050.0

Отзывы:

Похожие инструкции для K2.47050.0

Бренды по названию

Популярные бренды

ARRI K2.47050.0, Инструкция по эксплуатации

Результаты поиска

Содержание K2.47050.0

Отзывы:

Похожие инструкции для K2.47050.0

Бренды по названию

Популярные бренды