ARRI K2.47050.0, Инструкция по эксплуатации

Страница: 79 / 119

79
System info, LDS info and Status info are displayed together as a package.
If all three lines are on, the upper line will always be status, the center LDS
and the lower line system. Positioning always affects all lines.
Like all readable information, the data is inserted as a window on the
monitor image. The system, LDS and status window can be switched on
and off independently. Background and position can be altered without
affecting the settings of other windows.
The adjustment of the white level of the inserted data is described in
chapters 5.5.8 White Level, an inverse display is described in chapters
5.5.9 Inverse.
All changes are immediately active.
Check all settings on the connected monitor.
• Enter the System/LDS/Status submenu from the main menu.
5.8.1
System Info
This sub menu setting switches
the insertion of camera system
data ON and OFF
independently of other
inserted data.
Move the cursor by using the
keys
Ê
and
Ë
to the line
- SYSTEM LINE
→
Photo . The
keys Í or Ì switch the
insertion on and off.
A line similar to the one below
will appear:
- MOVEMENT OPEN -
Placement, Position and Background is only available if at least one of the
three lines is on. Film Counter is only available if the Status Line is on.
To clear this message, eliminate the cause of the problem. In this example
close the movement block.