ARRI K2.47050.0 Скачать руководство пользователя

Страница: 34 / 119

Manual Gain increase/decrease

Note: MANUAL GAIN

increase/decrease is

only available if
manual gain control is
on.

Move the cursor by using keys

and

to the line – VALUE

→

Photo

. Pressing the key

will increase the gain; the key

will decrease it.

The range for this is form 0

(lowest gain) to 63 (highest
gain).

If the keys

are pressed briefly, the value changes by one

increment, if the keys are pressed longer, the value will continue to
change.

The LED on the keyboard will follow the changes which are made in this
menu and vice versa, if this setting is changed via the keyboard, the on-

screen menu will follow.

4.7

Changing Format marking number

The HD-IVS can insert different format markings. It is possible to have

•

No format marking (OFF),

•

Format marking number one (1),

•

Format marking number two (2)

•

Or both format markings at the same time (1 & 2) on display.

4.7.1

Using the Keyboard

Note: The adjustment of the

different format
markings can only be
done via the on-screen
display as described in
chapter

5.6 Format

Marking Menu.

Содержание K2.47050.0
























































































































Результаты поиска

Содержание K2.47050.0

Отзывы:

Похожие инструкции для K2.47050.0

Бренды по названию

Популярные бренды

ARRI K2.47050.0, Инструкция по эксплуатации

Результаты поиска

Содержание K2.47050.0

Отзывы:

Похожие инструкции для K2.47050.0

Бренды по названию

Популярные бренды