ARRI K2.47050.0 Скачать руководство пользователя

Страница: 81 / 119

A line similar to the one below will appear:

25.7V RUN FWD 24.000/24.000fps 180.0 T 123FT

Placement, Position and Background is only available if at least one of the

three lines in on, Film Counter only if Status Line is on.

5.8.4

Placement

The system, LDS and status
window can be positioned

either as lines on the screen
(mode LINE) or on the right

hand side of the screen (mode
BLOCK), which is particularly
helpful if a 4:3 image is used.

POSITION is only available if
at least one of the three lines

is on.

Move the cursor by using the
keys

and

to PLACEMENT

→

Photo

Change the

placement mode from LINE to
BLOCK and back with the keys

The text layout in mode BLOCK is designed so that the readability is best.
Therefore the order of information is different than in the LINE mode.

Содержание K2.47050.0
























































































































Результаты поиска

Содержание K2.47050.0

Отзывы:

Похожие инструкции для K2.47050.0

Бренды по названию

Популярные бренды

ARRI K2.47050.0, Инструкция по эксплуатации

Результаты поиска

Содержание K2.47050.0

Отзывы:

Похожие инструкции для K2.47050.0

Бренды по названию

Популярные бренды