ARRI K2.47050.0, Инструкция по эксплуатации

Страница: 67 / 119

67
It is possible to have no format
marking (OFF), format
marking number one (1),
format-marking number two
(2) or both format markings at
the same time (1 & 2) on
display.
Move the cursor with the keys
Ê
and
Ë
to the line – FORMAT
→
Photo . Pressing the key
Í
will switch from OFF to 1 to 2 to
1 & 2 and back to OFF, the key
Ì
will switch in the opposite
direction.
5.6.2 Position - Positioning of the Format Marks
The format markings can be
adapted to every different
format. The format markings
on the ground glass serve as a
reference.
To align format 1, make sure
that FORMAT 1 or FORMAT
1&2 is selected. To align
format 2, make sure that
FORMAT 2 or FORMAT 1&2 is
selected.
To match the electronic format
markings with the ground
glass markings proceed as
follows:
•
Point the film camera towards a bright object so that the format
markings on the ground glass are clearly visible.
• Move the cursor by using the keys Ê and Ë to the line - POSITION 1 Ö
→
Photo or - POSITION 2
Ö →
Photo , depending on whether format 1 or
format 2 should get adjusted. The symbol
Ö
indicates that the top line
and the left line can be moved. To move the top line up and down, use
the keys
Ê and Ë , to move the left line left and right use the keys Í
and Ì . When the desired position is set, press the Enter/Insert key Ñ.
•
Move the cursor by using the keys
Ê
and
Ë
to the line - POSITION 1
š
→
Photo or - POSITION 2 š
→
Photo , depending on whether format 1 or