ARRI K2.47050.0 Скачать руководство пользователя

Страница: 111 / 119

111

Pixel Correction Menu

SHOW PIXELS

This line shows how many
defect pixels are covered
currently by the HD-IVS

software and to mark them on
the HD-IVS monitor.

To mark the defect pixels move
the cursor with the keys

and

to the line – SHOW PIXELS

→

Photo

. The keys

will

highlight the currently covered

pixels on the HD-IVS monitor

AUTODETECT

The HD-IVS detects defect
pixels automatically. For this

please have the HD-IVS
running for at least 45 minutes

and make sure that the HD-
IVS does not get any light, e.g.
by closing all camera

apertures using lens caps,
closing the ocular and
applying all other covers. The
HD-IVS will look for all pixels

which do not show the average

black level and cover them

up.

Move the cursor with the keys

and

to the line – AUTODETECT

→

Photo

The keys

will start the procedure. BUSY will indicate, that the

procedure is in progress.

Please check the picture to verify if the result is satisfactory

and

store the result as described in the next chapter. If not, please
repeat the procedure.

Содержание K2.47050.0
























































































































Результаты поиска

Содержание K2.47050.0

Отзывы:

Похожие инструкции для K2.47050.0

Бренды по названию

Популярные бренды

ARRI K2.47050.0, Инструкция по эксплуатации

Результаты поиска

Содержание K2.47050.0

Отзывы:

Похожие инструкции для K2.47050.0

Бренды по названию

Популярные бренды