ARRI K2.47050.0 Скачать руководство пользователя

Страница: 31 / 119

Manual White Balance red increase/decrease

Note: Manual white balance

red increase/decrease is

only available if WHITE
BALANCE control is on
manual.

If WHITE BALANCE is on MAN,
it is possible to adjust the red

and blue saturation of the
video image manually.

Move the cursor by using the
keys

and

to the line – RED

→

Photo

. Pressing the key

will increase the red in the
video image; the key

will

decrease it. The range for this
is from 0 (lowest) to 63
(highest).

If the keys

are pressed briefly, the value changes by one

increment measure, if the keys are pressed longer, the value will continue

to change.

The LED on the keyboard will follow the changes which are made in the
menu and vice versa, if this setting is changed via the keyboard, the on-

screen menu will follow.

Manual White Balance blue increase/decrease

Note: Manual WHITE BALANCE

– BLUE

increase/decrease is only
available if white
balance control is on
manual.

If manual WHITE BALANCE is
on MAN, it is possible to adjust
the red and blue saturation of
the video image manually.

Move the cursor by using the
keys

and

to the line

– BLUE

→

Photo

. Pressing the

key

will increase the blue in

the video image; the key

Содержание K2.47050.0
























































































































Результаты поиска

Содержание K2.47050.0

Отзывы:

Похожие инструкции для K2.47050.0

Бренды по названию

Популярные бренды

ARRI K2.47050.0, Инструкция по эксплуатации

Результаты поиска

Содержание K2.47050.0

Отзывы:

Похожие инструкции для K2.47050.0

Бренды по названию

Популярные бренды