Arjohuntleigh Alenti, Инструкция по эксплуатации

Страница: 58 / 64

58
Electromagnetic Compatibility
Medical electrical equipment needs special precautions regarding EMC (Electromagnetic com-
patibility) and needs to be used according to the EMC information below.
The Alenti is intended for use in the electromagnetic environment specified below. The cus-
tomer or the user of the Alenti should assure that it is used in such an environment.
WARNING
Stacking or placing other electrical equipment next to this device is not recom-
mended, it can interfere with the equipment’s operation and safety. Portable
and mobile radio-frequency (RF) communications equipment can interfere
with this equipment operation and safety.
WARNING
The equipment may cause radio interference or may disrupt the operation of
nearby equipment. It may be necessary to take action, such as reorienting,
relocating the equipment or shielding the location.
Guidance and manufacturer’s declaration - electromagnetic emissions
Emissions test Compliance Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1
Alenti uses RF energy only for its internal
function. Therefore, its RF emissions are very
low and are not likely to cause any interference
in nearby electronic equipment.
RF emissions
CISPR 11
Class B
Alenti is suitable for use in all establishments,
those directly connected to the public low-volt-
age power supply network that supplies build-
ings used for domestic purposes.
EN 61000-4-8 3A/m at 50/60 Hz
Magnetic Immunity: If functional disturbance
occurs on the
Alenti it may be necessary to
move the Alenti further from the source of
power frequency magnetic field. The power
frequency magnetic field should be measured
in the intended use locations to assure that it is
sufficiently low.