Arjohuntleigh Alenti, Инструкция по эксплуатации

Страница: 42 / 64

42
Disinfection Instructions
For the best results, only use
ArjoHuntleigh branded
disinfectant.
If you have any questions regarding disin-
fecting the equipment or wish to order disin-
fection fluid (see
Parts and Accessories ),
contact you local ArjoHuntleigh representa-
tive.
The following procedure should be carried
out after every use and at the end of the day.
Accessories for disinfecting the
Alenti
• Protective gloves
• Protective glasses
• Spray bottle (if integrated disinfection
system is not available)
• Cloth
• Disinfectant fluid
• Towel
WARNING
To prevent cross-contamination,
always follow the disinfection
instructions in this Instructions for
Use.
WARNING
To avoid eye and skin damage,
always use protective glasses and
gloves. If contact occurs rinse with
plenty of water. If eyes or skin
becomes irritated, contact a physi-
cian. Always read the material
safety data sheet of the disinfectant.
CAUTION
To avoid damage on the equipment
only use ArjoHuntleigh branded dis-
infectants.
Always follow these 9 steps for
proper disinfection.
1 Put on protective gloves and glasses.
(See Fig. 1)
2 Remove the back rest and safety belt and
place them at the bottom of the bath and
disinfect separately.
(See Fig. 2)
Position Alenti over the bath and lower it
down.
3 Most ArjoHuntleigh baths are equipped
with a spray handle for disinfecting pur-
poses. Read the bath instructions on how
to use the disinfection spray. Check the
level of the disinfectant.
4 Using the disinfection spray, spray disin-
fectant on
Alenti. (See Fig. 3)
Check that the disinfectant fluid is mixed
at the correct dilution ratio.
5 If you do not have the integrated disin-
fection equipment, you can use a spray
bottle containing disinfection fluid
mixed according to the printed instruc-
tions on the disinfection bottle.
6 Scrub the chair. Make sure to disinfect
the underside of the seat as well. Use a
nylon bristled brush, rag or disposable
cloth.
(See Fig. 4)
7 Allow a disinfectant contact time accord-
ing to the instructions printed on the dis-
infectant bottle or according to your local
regulations.
8 Rinse thoroughly with water until no
remaining disinfectant residue is visible.
9 Dry each part of Alenti with a clean cloth.