Arjohuntleigh Alenti, Инструкция по эксплуатации

Страница: 38 / 64

38
Labels and indicators
On the data label you will find the following
information:
• standard approval certificate no.
• Article number
• W1=Range scale 1: 2 - 120 kg (± 100g)
W1=Range scale 1: 4 - 264.6 lbs (± 0.2
lbs)
• W2= Range scale 2: 4 - 160 kg (± 200g)
W2= Range scale 2: 10 - 352 lbs (± 0.5
lbs)
• d= actual scale division
• e=verified scale division
The values are equal in this scale.
Verification labels
After verification the following labels are to
be found on the scale: (The marking in some
countries may be different due to local regu-
lations)
• Seal marks (under the cover) (See Fig. 1)
• CE mark (A) (See Fig. 2)
• Year of 1st verification (B) (See Fig. 2)
• Authorized body’s verification mark ( C)
(See Fig. 2)
• Green M mark (D) (See Fig. 2)
This scale fulfils the regulations of
EN 45501/OIML R76-1.
The certification is according to the
Council Directive 90/384 EEC,
Non-automatic Weighing Instrument Direc-
tive.
Calibration
Only on markets outside EU.
Regular checks ought to be done as well as
recalibration, if necessary. Calibrations
should be performed according to local reg-
ulations.
Weighing unit
The pre-installation of Alenti Scale is kg.
If you want to change from kg to lbs or vice
versa, press the button for about 10 seconds.
NOTE
The weighing unit can not be changed
on a verified scale.