Arjohuntleigh Alenti, Инструкция по эксплуатации

Страница: 24 / 64

24
To wheelchair (6 steps)
1 Position Alenti’s front towards the side of the
wheelchair. (See Fig. 1)
2 Adjust Alenti to an appropriate height for the
transfer. In some cases, it’s easier to transfer if
the
Alenti seat is higher than the wheelchair
seat.
3 Activate the brakes on both Alenti and the
wheelchair.
4 Take of the safety belt and attach the safety belt
clip to the hand rest-handle arm.
5 Fold back the hand rest-handle arm, away from
the resident.
6 The resident can now transfer seats from Alenti
to the wheelchair. (See Fig. 1)
To the toilet (3 steps)
Alenti can be used regardless of whether the toilet
is attached to the wall or to the floor. (See Fig. 2)
1 Position Alenti’s front directly over the toilet
bowl. (See Fig. 3)
2 Lower the Alenti seat and activate the brakes.
3 Make sure to disinfect Alenti after each use to
prevent cross-contamination. (See Fig. 4)
See section, Disinfection Instructions.
WARNING
To avoid entrapment or pinching of geni-
tals, make sure there is enough clearance
during movement over the tub edge, toi-
let, bedpan or other furniture.