APS 6RL Series, Руководство по эксплуатации

Страница: 38 / 204

6RL SERIES OPERATION MANUAL
SECTION 4: TECHNICAL SPECIFICATIONS
Entire Contents Copyright

2018 by Adaptive Power Systems, Inc. (APS) • All Rights Reserved • No reproduction without written authorization from APS.
6RL Series Regenerative DC Load Operation Manual Page 38 of 204
15 kW
Model
6RL15-60-750-4 6RL15-40-1000-4 6RL15-30-1500-4
AC supply
Voltage 342...528 V
Phases 3ph, PE
Frequency 50/60 Hz ±10%
Efficiency
(2
≤ 94.5% ≤ 93.5% ≤ 94.5%
DC Input
Max. input voltage UMax 750 V 1080 V 1500 V
Max. input power PMax 15 kW 15 kW 15 kW
Max. input current IMax 60 A 40 A 30 A
Overvoltage protection range 0...1.1 * UMax 0...1.1 * UMax 0...1.1 * UMax
Overcurrent protection range 0...1.1 * IMax 0...1.1 * IMax 0...1.1 * Imax
Overpower protection range
0...1.1 * PMax 0...1.1 * PMax 0...1.1 * PMax
Max. allowed input voltage 1.2 * UNom 1.2 * UNom 1.2 * UNom
Min. input voltage for IMax 6.9 V 6.9 V 9.2 V
Input capacitance ca. 180 μF ca. 310 μF ca. 33 μF
Temp.coef. for set values Δ/K Voltage / current: 100 ppm
Voltage regulation
Adjustment range 0...765 V 0...1101.6 V 0...1530 V
Stability at ΔI < 0.05% UMax < 0.05% UMax < 0.05% UMax
Accuracy
(1
(@23±5°C / 73±9°F)
< 0.1% UMax < 0.1% UMax < 0.1% UMax
Display: Adjustment resolution See section 6.2.6, “ Available resolutions by voltage models: ” on page 59
Display: Accuracy
(3
≤0.2%
Remote sensing compensation max. 5% UMax
Current regulation
Adjustment range 0...61.2 A 0...40.8 A 0...30.6 A
Stability at ΔU < 0.15% IMax < 0.15% IMax < 0.15% IMax
Accuracy
(1
(@23±5°C / 73±9°F)
< 0.2% IMax < 0.2% IMax < 0.2% IMax
Display: Adjustment resolution See section 6.2.6, “ Available resolutions by voltage models: ” on page 59
Display: Accuracy
(3
≤0.2%
Compensation 10-90% ΔUDC < 0.6 ms < 0.6 ms < 0.6 ms
Power regulation
Adjustment range 0…15300 W 0…15300 W 0…15300 W
Stability at ΔI / ΔU < 0.75% PMax < 0.75% PMax < 0.75% PMax
Accuracy
(1
(@23±5°C / 73±9°F) < 1% PMax < 1% PMax < 1% PMax
Display: Adjustment resolution See section 6.2.6, “ Available resolutions by voltage models: ” on page 59
Display: Accuracy (3 ≤0.2%
Resistance regulation
Adjustment range 0.4…740 Ω 0.8...1300 Ω 2.5…3000 Ω
Accuracy
(4
(@23±5°C / 73±9°F)
≤1% of max. resistance ± 0.3% of rated current
Display: Adjustment resolution See section 6.2.6, “ Available resolutions by voltage models: ” on page 59
1. Related to the nominal values, the accuracy defines the maximum deviation between an adjusted value and the true (actual) value on the DC
input. Example: a 170 A model has min. 0.4% current accuracy, which calculates as 680 mA. When adjusting the current to 80 A, the actual
current on the DC input is allowed to differ by a maximum of 680 mA, which means it may be between 79.32 A and 80.68 A.
2. Typical value at 100% input voltage and 100% power
3. The display accuracy adds to the accuracy of the related actual value on the DC input, so the display accuracy will be lower, i.e. the error will be
higher
4. Includes the accuracy of the displayed actual value