andrews 7800597, Руководство по установке и обслуживанию

Страница: 48 / 88

Commissioning 48 MAXXfl o EVO 150/302
Model MAXXfl o EVO 150
LPG Orifi ce size 6.0 mm
Initial Adjustment
G20 to G31 0.5 turns
anti-clockwise
CO
2
Combustion
Figure - LPG (G31)
9.8% +/- 0.2%
CATEGORY: I2H
FLUE TYPES: B23,C13,C33,C53,C63
0063-22
NG ONLY ADJUSTED FOR G20 @ 20mbar
MODEL:
MAXXflo EVO
CWH 150/302
7800597
HEAT INPUT (GROSS) Q(Hs)= 151.0kW
HEAT INPUT (NET) Q(Hi)= 136.0kW
HEAT OUTPUT P= 148.2kW
CO
2
MAX RATE 9.0% (± 0.2%)
This appliance may only be installed in a room which complies with the
appropriate ventilation requirements. Read the technical instructions before
installing this appliance.
CONDENSING APPLIANCE
MAX WORKING PRESSURE 9 bar
CAPACITY 300 Litres
POWER SUPPLY 230V ~ 50Hz, IP20, 359W
PIN CODE 0558CU2236 / 0063CT3553
COUNTRIES OF DESTINATION UK:IE
Year:
2022
Serial
No:
123456789
Manufactured by Malvern Boilers Ltd, Malvern, WR14 1BW, for:
Baxi Heating UK Ltd, Coventry Road, Warwick, UK CV34 4LL M10120A
0558-22
Fix new data plate
over original
CATEGORY: I2H
FLUE TYPES: B23,C13,C33,C53,C63
006 63 - 22
NG ONLY ADJUSTED FOR G20 @ 20m m bar
MODEL:
MAXXflo EVO
CWH 150/302
78005 5 97
HEAT INPUT (GROSS) Q(Hs)= 1 51.0k kW
HEAT INPUT (NET) Q(Hi)= 136 .0k kW
HEAT OUTPUT P= 148 .2k kW
CO
2
MAX RATE 9.0% ( ± 0.2%)
This appliance may only be installed in a room which complies with the e
appropriate ventilation requirements. Read the technical instruct ions b before
installing this appliance.
CONDENSING APPLIANCE
MAX WORKING PRESSURE 9 bar
CAPACITY 300 Litres
POWER SUPPLY 230V ~ 50Hz, IP20, 3 359 W
PIN CODE 0558CU2236 / 0063C CT355 3
COUNTRIES OF DESTINATION UK:IE
Year:
2022
Serial
No:
123456789
Manufactured by Malvern Boilers Ltd, Malvern, WR14 1BW, for:
Baxi Heating UK Ltd, Coventry Road, Warwick, UK CV34 4LL
M10120
0558-22
CATEGORY: I3P
FLUE TYPES: B23,C13,C33,C53,C63
0063-22
LPG ONLY ADJUSTED FOR G31 @ 37mbar
MODEL:
MAXXflo EVO
CWH 150/302
7800597
HEAT INPUT (GROSS) Q(Hs)= 147.8kW
HEAT INPUT (NET) Q(Hi)= 136.0kW
HEAT OUTPUT P= 148.2kW
CO
2
MAX RATE 9.9% (± 0.2%)
This appliance may only be installed in a room which complies with the
appropriate ventilation requirements. Read the technical instructions before
installing this appliance.
CONDENSING APPLIANCE
MAX WORKING PRESSURE 9 bar
CAPACITY 300 Litres
POWER SUPPLY 230V ~ 50Hz, IP20, 359W
PIN CODE 0558CU2236 / 0063CT3553
COUNTRIES OF DESTINATION UK:IE
Year:
2022 Serial
No: 123456789
Manufactured by Malvern Boilers Ltd, Malvern, WR14 1BW, for:
Baxi Heating UK Ltd, Coventry Road, Warwick, UK CV34 4LL M10120A
0558-22
• Secure the venturi onto the fan using 2 screws
• Secure the venturi onto the gas valve with the remaining 3 screws. Ensure the rubber seal and orifi ce
remains in place inside the gas valve outlet.
• Replace the air intake hose onto the venturi. Compress the spring clip when fi tting in place
• Using a 4mm allen key or large fl atblade screwdriver, make an intial adjustment to the throttle adjustment
screw according to the table above.
• Follow the commissioning procedure in section 5.2 from page 35 with the exception that the CO
2
combus-
tion fi gure should now be as listed in the table above for LPG (G31)
It should not be necessary to turn the throttle screw more than two turns away from the initial
adjustment setting to achieve ignition. If this is the case, ensure that the components are refi tted
correctly and also be aware that the gas carrying pipes may need purging before gas is available
for ignition at the burner.
• Allow one minute between adjustments, and do not move the adjuster more than 1/4 turn at any one time
• Replace the cover over the throttle adjustment screw, when adjustment is complete
• Repeat process above for the second heat engine
• Affi x the new LPG serial number data label supplied with the heater over the top of the existing natural
gas data plate
• Fit LPG warning label to heater cover.
+
CO
2 2
_
CO
2
Throttle adjustment screw T T