AMX NetLinx NXP-TPI/4, Руководство по эксплуатации/справочник

Страница: 69 / 148

Firmware Pages and Descriptions
63 NXP-TPI/4 NetLinx Touch Panel Interface
If a Slot ID contains no TP4 card the corresponding Slot buttons (FIG. 45) will be greyed-out.
The RGB Adjustment page appears when the selected (or default) input slot is using a
TP4-RGB card.
The Video Adjustment page appears when the selected (or default) input slot is using a TP4-
VID card.
Video Adjustment - Video Adjustment
The Video Adjustment page (FIG. 46) ( accessed by pressing the Video Adjustment button on the Setup
page and then selecting a SLOT # from the option bar which contains a TP4-VID card ) sets the Video
properties of the incoming video signal. These slots are labeled at the rear of the unit.
The elements of the Video Adjustment page are described in the table below:
FIG. 46 Video Adjustment page (showing default values)
Video Adjustment Page Elements
Back: Saves the changes and returns you to the previously active touch panel page.
Connection Status icon: This visual display of the connection status allows the user to have a current
update of the TPI/4’s connection status regardless of what page is currently
active.
• A Lock only appears on the icon if the TPI/4 has established a connection with
a currently secured target Master ( requiring a username and password ).
Settings: • The Default Settings button sets the video settings to their default values
(indicated in this table).
• The Undo Changes button disregards any changes made on the page since
the last settings were saved.
• The Save Settings button saves any changes made to this page.
Video Settings: • The Black & White button toggles the Black & White display mode.
Default = Off.
• The Sharpness button toggles the Interpolate (Sharpness) feature.
Default = Off.
• The Interlace button toggles the Interlacing feature.
Default = Off.
Status: Displays whether or not a video-sync signal is detected.
Version: Displays the firmware version being used by the selected TP4-VID card.
Incoming Video signal
Once done making your screen
adjustments, SAVE SETTINGS.